vihtavuori n555 Options
vihtavuori n555 Options
Blog Article
I will drop again a couple of grains and get the job done up and see what comes about .I've and use alot with the 2400.Received two from the outdated Enfields Number one MKIII's and would like to consider it in them also,haven't loaded for them nonetheless but beeing a rifle bored out to 410ga it might be that I could bump them up a little bit more,a regular 410 shotshell wont fit the chambers on these and I will have to fireform for them individually,the sights are riveted so I must control the load to obtain them to shoot ideal.
Have confidence in is, the AA CF hulls have fewer quantity compared to HS hulls, and it not really a Performing force challenge, but just not more than enough space in the hell to obtain it up around 1300fps While using the wanted quantity of powder as an alternative.
Reviews can only be submitted even though staying logged in. Remember to enter your login details beneath. New client?
Two items to point out at the same time, little grain powder demands a sizzling primer to get it heading (Earn 209 is okay) and desires Performing stress to acquire a good burn in addition.
For anyone who is reloading within the 1200fps variety isntead, then your superior off While using the #296 powder as a substitute (slightly quicker melt away price, so a slightly better melt away at the slower speeds/pressures as an alternative). Hell, acquire is one particular phase farther, and if you are within the 1200fps selection in 410, greater off with lil gun or 410 powder, considering that they have got a cleaner burn off at these speeds, considering the fact that they may have a higher Doing work tension at these speeds alternatively (burn while in the #294-#295 melt away vary isntead, and this sort of powder burns to quick to have you into the 1350fps array to begin with since you will dancing/flirty with max Doing the job pressures isntead).
And Indeed, I have utilised all three powders, and will drop flats of these on stations in mixes, so you would not be capable of inform which shell experienced what powder, For the reason that speeds and patterns are so shut jointly within the 1350fps assortment, there's no practical big difference in overall performance in the shells.
So 296/297 at 1200fps leaves a great deal of unburnt powder during the bore, when the a lot quicker/higher Functioning force loads true ends up with considerably less unburnt powder inside the bores isntead.
If The main reason that you are swapping powders is mainly because of the migration challenge from the great ball powder making it way earlier the seal and clogging the machine, John and I have think of powder kind seals that accurate the problems in the PW devices, and the look could be transformed around into the Spolar devices at the same time.
Our Main values are definitely the passion for serving our customers, our understanding of the coffee current market along with the profound respect for the espresso producers who work hard to deliver the best harvests year on year. Without any of these values, The full process wouldn't be viable.
I've yet to try 300MP, but from all studies it's a good 410 powder. I moved to W-296/H-one hundred ten a variety of years back, for a similar good reasons that Bob states. Higher velocities with lessen pressures. It handles this discipline nicely, and with Excellent situation lifetime.
immediately after five hundred or so rounds I have to clean the powder equipment location or issues begin to bind up a little bit. I'm even now seeking to determine Should the hull lifestyle is worthy of the problems that arrived with it.
Your rammer tube could be established also reduced. I have never loaded .410, but I believe the 30 lb. you must transfer the indicator is excessive for a .410 wad. Try ramming a wad With all the clamp free and find out When the rammer tube moves up. If it does, consider a crimp. If that is as well high, reduced and champ the tube about half way.
Next, the look at that Lil Gun kills hull daily life. I get various reloads with Lil Gun in AAHS hulls. I also like 296/H110 - but just declaring, Lil Gun is an effective powder in addition. And it patterns properly in click over here my gun - along with any .410 powder.
Hazmat Info: You might buy approximately forty eight lbs of smokeless powder in almost any packaging combination along with a combined get with primers never to exceed 70 kilos. The DOT-imposed hazmat fee for every box and typical transport rates implement. Floor Hazmat shipping surcharge will apply to all orders made up of powder or primers. Merge powder and primers for an improved value. Maximum my site cargo weights of 48 lbs powder; 70 lbs powder and primers combined.